Suscriber Units
Ruggedized 100 Mbps Die Cast Enclosure
Corporate Subscriber Units
The OR-11 is an ideal cost-effective outdoor wireless networking solution for ISP service companies, and corporate branches. The OR-11 has been designed from the beginning to give carrier class quality service, therefore itcan do long distance links in the toughest environments with outstanding stability.
The OR-11 can be used as a stand-alone Base Station client, or to build point-to-point links. The OR-11 is equipped with one Ethernet port, that can be connected to a switch or an access Point without the need to install a router. This feature represents significant savings on hardware costs.
The OR-11 uses OFDM technology operating in the 5.8/ 2.4 GHz license free bands. Because OFDM can take advantage of reflected RF signals, it is now possible to connect locations you may have thought were inaccessible due to line of sight barriers.
Most features of the OR-11 are pre-configured and automatically adapt to the environment, making configuration and use very simple. The OR-11 supports VLAN, transparent Bridge and comes with robust management features, such as NAT, DHCP Client, DHCP Server, IP Routing, RIP2 and SNMP. These features and its processing capacity make the OR 11 a unique product in the outdoor wireless market.
Suscriber Units
Ruggedized 100 Mbps Die Cast Enclosure
OR11 - Corporate Subscriber Units
Hardware Highlights
- 5.8 Ghz or 2.4 GHz OFDM
- 1 Ethernet, 1 RF
- 300 MHz- 32 MRAM Processor
- Ideal for Building to Building Links
- IP 66: Engineered for reliability even in the hottest regions of the world
C-Class Router OS Software (Client Only)
- Transparent MAC Layer operation
- VLAN support
- Learning bridge that supports forwarding and filtering
- Durable outdoor case construction
- IP Routing
- Spanning Tree Protocol
- Polling
- Long Distance throughput
- Super packet Aggregation
- VoIP Support
- QoS
Radio Features
- Wireless data rates of up to 54 Mbits/sec
- Full bandwidth management/ CIR/ MIR
- 20 Mbs real throughput
- No FCC license required
- Wide Band: 5.1-5.3-5.8 GHz
- Radio link and antenna alignment diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles. (25 miles with amplified antennas)
- Output Power 200 mW
Ethernet Features
- 10/ 100 Dual Ethernet (802.3 Compliant)
- Power over Ethernet
Suscriber Units
Ruggedized 100 Mbps Die Cast Enclosure
OR11M - 100 Mbps Long distance ruggedized CPE
Hardware Highlights
- 5.8 Ghz or 2.4 GHz OFDM
- 1 Ethernet, 1 RF
- 300 MHz- 32 MRAM Processor
- Ideal for Building to Building Links
- IP 66: Engineered for reliability even in the hottest regions of
the world C-Class Router OS Software (ptp only) - Transparent MAC Layer operation
- VLAN support
- Learning bridge that supports forwarding and filtering
- Durable outdoor case construction
- IP Routing
- Spanning Tree Protocol
- Polling
- Long Distance throughput
- Super packet Aggregation
- VoIP Support
- QoS
Radio Features
- Wireless data rates of up to 300 Mbits/sec
- Full bandwidth management/ CIR/ MIR
- 100 Mbs real throughput
- No FCC license required
- Wide Band: 5.1-5.3-5.8 GHz
- Radio link and antenna alignment diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles. (25 miles with amplified antennas)
- Output Power 23 dBm
Ethernet Features
- 10/ 100 Dual Ethernet (802.3 Compliant)
- Power over Ethernet
Suscriber Units
Ruggedized 100 Mbps Die Cast Enclosure
OR11X - Extreme Distance Subscriber Units
Hardware Highlights
- 5.8 Ghz or 2.4 GHz OFDM
- 1 Ethernet, 1 RF
- 300 MHz- 32 MRAM Processor
- Ideal for Building to Building Links
- IP 66: Engineered for reliability even in the hottest regions of the world
C-Class Router OS Software (Client Only)
- Transparent MAC Layer operation
- VLAN support
- Learning bridge that supports forwarding and filtering
- Durable outdoor case construction
- IP Routing
- Spanning Tree Protocol
- Polling
- Long Distance throughput
- Super packet Aggregation
- VoIP Support
- QoS
Radio Features
- Wireless data rates of up to 54 Mbits/sec
- Full bandwidth management/ CIR/ MIR
- 20 Mbs real throughput
- No FCC license required
- Wide Band: 5.1-5.3-5.8 GHz
- Radio link and antenna alignment diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles. (25 miles with amplified antennas)
- Output Power 600 mW
Ethernet Features
- 10/ 100 Dual Ethernet (802.3 Compliant)
- Power over Ethernet
Suscriber Units
Antenna Embedded Suscriber Units
OR14PM - Remote Outdoor Router
The OR-14P is an ideal cost-effective outdoor Subscriber unit for ISP service companies, and corporate branches. Designed from the beginning to give carrier class type services, OR14P can do long distance links in the toughest environments with outstanding stability.
It can be used as a stand-alone Base Station Client, or for point-to-point links. The OR14P is Equipped with one Ethernet port, to connect to a hub, a switch or an Access Point without the need to install a router. This feature represents significant savings on hardware costs.
OR14P uses OFDM/ MIMO technology operating in the 5.1 to 5.8 GHz license free bands. Because OFDM can take advantage of reflected RF signals, it is now possible to connect locations you may have thought were inaccessible due to line of sight barriers.
Most features of the OR-14P are pre-configured and automatically adapt to the environment, making configuration and use very simple. The OR-14P supports VLAN, transparent Bridge and comes with robust management features, such as NAT, DHCP Client, DHCP Server, IP Routing, RIP2 and SNMP. These features plus TDMAand its processing capacity make the OR 14P a unique product in the outdoor wireless market.
Hardware Highlights
- 400 MHz- 32 RAM Processor
- 14 dBi Embedded Patch Antenna
- OFDM/ MIMO
- NEMA4. Engineered for reliability even in
- the hottest regions of the world
Radio Features
- Full bandwidth management/ CIR/ MIR
- 150 Mbs real throughput
- No FCC license required
- 14 dBi, 25 degrees beam width antenna
- 5.1 GHz to 5.8 GHz user-selectable operating sub-channels
- Radio link and antenna alignment diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles.
- Output Power 200 mW
Ethernet Features
- 10/ 100 Dual Ethernet
- Power over Ethernet
- 802.3 Compliant
Suscriber Units
Antenna Embedded Suscriber Units
OR-19P / OR-24P / OR-19PX / OR-24PX
Remote Outdoor Router Extreme Series
30 Mbps 19/ 24 dBi Extreme Distance Panel Integrated Radio
The OR-19/24P is an ideal cost-effective outdoor Subscriber unit for ISP service companies, and corporate branches. Designed from the beginning to give carrier class type services, OR19/24 can do long distance links in the toughest environments with outstanding stability.
Hardware Highlights
- 300 MHz Processor - 32MB RAM
- 19 or 24 dBi Embedded Patch Antenna
- OFDM/ TDMA
- NEMA4. Engineered for reliability even in
- the hottest regions of the world
CClass Software (PTP)
- Transparent MAC Layer operation
- VLAN support
- Learning bridge that supports forwarding
- and filtering
- IP Routing
- Spanning Tree Protocol
- VoIP Support
- QoS
- Nstreme features:
- Polling
- Long Distance throughput
- Super packet Aggregation
Radio Features
- Full bandwidth management/ CIR/ MIR
- 30 Mbps real throughput
- No FCC license required
- 19P SERIES: 19 dBi, 16 degrees beam
- width antenna
- 24P SERIES: 24dBi, 8 degrees beam width
- antenna
- 4.9 GHz to 6 GHz user-selectable operating
- sub-channels
- Radio link and antenna alignment
- diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles.
- Output Power 200 mW
- Output Power 600 mW (XSeries )
Ethernet features
- 10/ 100 Dual Ethernet
- Power over Ethernet
- 802.3 Compliant
Suscriber Units
Antenna Embedded Suscriber Units
OR19PM-200 / OR19PM / OR24PM-200
Remote Outdoor Router
100 Mbps TDMA Long Distance Panel Integrated Radio
The OR-19/24P is an ideal cost-effective outdoor Subscriber unit for ISP service companies, and corporate branches. Designed from the beginning to give carrier class type services, OR19/24 can do long distance links in the toughest environments with outstanding stability.
Nv2 Wireless protocol based on TDMA
TDMA(Time Division Multiple Access) is a channel access method for shared medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using his own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a art of its channel capacity.
The most important benefits of Nv2 are:
Increased speed, More client connections in PTM environments, Lower latency, No distance limitations, Possibility to set CPE association priorities, so when AP switches to Nv2, all CPEs switch too, allowing easy migration and upgrade.
Nv2 enables a special QoS mechanism to give priority to small packets, and improves link latency
Hardware Features
- 300 Mhz- 32 RAM Processor
- 400 MHz-32 RAM (200 Series)
- 19 or 24 dBi Embedded Patch Antenna
- OFDM/ MIMO
- NEMA4. Engineered for reliability even in
- the hottest regions of the world
- Full bandwidth management/ CIR/ MIR
- 150 Mbs real throughput
- No FCC license required
- 19P SERIES: 19 dBi, 16 degrees beam
- width antenna
- 24P SERIES: 24dBi, 8 degrees beam width
- antenna
- 4.9 GHz to 6 GHz user-selectable operating
- sub-channels
- Radio link and antenna alignment
- diagnostics
- WEP hardware encryption standard
- Operating range up to 10 miles.
- Output Power 200 mW (200 Series)
- Output Power 320 mW (M Series)
Ethernet Features
- 10/ 100 Dual Ethernet
- Power over Ethernet
- 802.3 Compliant